“Dream” Steam Room

The cabin is made of 42 mm sandwich panels. These panels are made of 40 mm of PET, the external side of 1 mm of balancer and the internal side of 1 mm of HPL. 

The central part is composed of PET, a thermoplastic resin, which using 100% recycled beverage bottles and converting them into recycled PET, is 100% green.

The inner covering is composed of 1 mm of HPL White, Vulcano, Gray Cement, Tivoli.

The glass closure is made of 8mm of thickness Float glass sheets, tempered, properly worked. The door, 70 cm, wis hinged with shiny chrome hinges with snap opening. 

For the opening there is a stainless steel pull handle. The door opens only to the outside at 90°.

The steel steam dispenser is positioned on the cabin wall to release the steam inside the cabin. 

The steam dispenser is connected to the steam generator placed in the technical compartment by a flexible tube through which the steam passes. 

The temperature sensor is located in the upper part of the cabin.

The steam bath is provided with a steam generator positioned in a dedicated technical space or placed above the cabin (minimum room height 280 cm).

Inside the cabin there is a capacitive glass display. This backlit display allows the management of the temperature inside the cabin, lights and sound (if present). 

(The keyboard will not be present if the GENIUS system is chosen).

The cabin is completed with a Kneipp handshower. This hand shower only distributes cold water to quickly cool the body inside the steam bath and create the hot / cold shock.

The cabin is supplied with a bench in Corian White or Black with corian legs.

The cabin is equipped with RGB LEDs on the bench and on the ceiling.